Verifying or Assigning the TCP/IP Port Assigned to Intruder Alert on the IBM i

 

This is done as follows:

DetectIT Native

• Sign on to the IBM i using the ALERT profile.
• Execute the command WRKDTITCP.

To assign the TCP/IP port:

• Select F6 = Add.
• Enter option "1″ against product "ITA".
• Enter the required TCP/IP port number (this must be the same as entered during the interface installation or when you used the itadticfg command).

To change the TCP/IP port:

• Enter option "2″ against product "ITA".
• Enter the required TCP/IP port number.

DetectIT Graphical

From the 'iSeries Data' drop down menu, select 'Maintain TCP Connections'.

• To assign the TCP/IP port: Select 'Add'.
• Highlight product "ITA" and select "Add".

To change the TCP/IP port:

• Highlight product "ITA" and select "Edit".
• Enter the required TCP/IP port number (as entered during the interface installation or when you used the itadticfg command).