Problem:
Getting an FTP error (22049) from WinSpool/400 Report Download when downloading a report.
The log showed:
Exception encountered for FTP exit program GSCCAS@R in library SMZ8SYS for exit point .
Solution:
Remove the QIBM_QTMF_SERVER_REQ exit point program:
- Use the WRKREGINF command to find exit point QIBM_QTMF_SERVER_REQ.
- Select option 8 on it.
- Remove the exit point program.
Use the same instructions to remove the other two FTP exit points:
QIBM_QTMF_CLIENT_REQ
QIBM_QTMF_SVR_LOGON
After removing the exit points, end and restart the FTP server with the following commands:
ENDTCPSVR *FTP
STRTCPSVR *FTP
Note: The 22049 error means that FTP couldn't find the file to download. The error was being caused because the required temp file wasn't getting created corrrectly on the AS/400, so the download failed.
Last Modified On:
No, open a new Support Case