Problem:
Unable to Log On to FTP Server: 0
Solution:
1. Check if the FTP Server is running:
NETSTAT
Option 3
ftp-con should appear at the top of the list.
If FTP is not running, start the FTP server with the command:
STRTCPSVR SERVER(*FTP)
2. Check whether a firewall on the Windows machine is active. If so, open port 21 or temporarily disable the firewall and try again.
3. If you are using a System Name rather than an IP Address, try the IP Address. It is possible that the System Name is not resolving, or was misspelled.
Last Modified On:
No, open a new Support Case