• Stand Guard Network Security version 2.3 is currently installed.

  • Ability to sign on to the IBM i as QSECOFR or equivalent (*SECADM, *ALLOBJ, and authority to the ALWOBJDIF parameter on the RSTOBJ command).


  1. Create a temporary directory on your PC: C:\TEMP.

  2. Download the file,, to the temporary directory. Current users can access the download from the My Downloads page. If you're a new user, you should have received an email message containing the download link. If you don't have it, contact your Bytware Regional Manager.

  3. Unzip the file to the C:\TEMP directory.

  4. Open a DOS window (Click Start > Run, type COMMAND, and press Enter). Then, type the following commands:

    1. FTP, then press Enter.

    2. OPEN, then press Enter.

    3. Type your IBM i system name or IP address, then press Enter.

    4. If necessary, type your username and password, then press Enter.

    5. QUOTE RCMD CRTSAVF QGPL/CVTSG, then press Enter.

    6. BIN, then press Enter.

    7. PUT C:\TEMP\CTSG QGPL/CVTSG, then press Enter.

    8. BYE, then press Enter.

  5. Sign on to the IBM i with *ALLOBJ and *SECADM authority and run the following commands:



  6. Verify that StandGuard Network Security has been correctly converted to a licensed program:

    1. Run the command: GO LICPGM.

    2. Enter Option 10, Work with Licensed Programs.

    3. Locate 0SG2000.

    4. Confirm the status is *INSTALLED.


Still have questions? We can help. Submit a case to technical support

Last Modified On:
You don't have the appropriate permissions.
No, open a new Support Case