I need to create a custom probe , and no MIB file is available. I do have the OID's that are required. I can use the OID's and get the values from the device using SNMP get command, but when i create a custom probe it shows N/A.
This is the Probe below. Hope someone can offer some help.
<!--
FlexScada FlexQ4 probe for InterMapper - http://intermapper.com
Copy this text and save as a file named: com.dartware.snmp.flexscadaflexq4.txt
Then import it using File -> Import -> Probe...
This is an InterMapper SNMP probe that monitors several variables for InterMapper.
... You can add more commentary if it would be useful ...
As you make modifications, be sure to update the Revision history below:
Revisions:
8/27/2018 Generated by Interactive SNMP Probe Builder page, version 1.0a1,
at: http://intermapper.com/probebuilder.aspx
-----------------------------------------------------------------------------------
Please feel free to use this file as a base for further development.
Read the Developer Guide to learn more about InterMapper Probes. The Guide is at:
http://dartware.com/go.php?to=intermapper.devguide
-->
-- The <description> section contains the text that will appear in the Set Probe... window.
-- It gives you a chance to describe how the probe works, what the parameters are, and how to
-- how to set it up.
<description>
\gb\FlexScada FlexQ4\p\
Probe to View Voltages and relay status using FlexScada FlexQ4
</description>
-- The <header> section determines the probe's unique name, what kind of probe it is,
-- its Human Name, and its place in the probe picker hierarchy, and other assorted attributes.
<header>
"type" = "custom-snmp"
"package" = "com.dartware"
"probe_name" = "snmp.flexscadaflexq4"
"human_name" = "FlexScada FlexQ4"
"display_name" = "Experimental/FlexScada FlexQ4"
"version" = "1.0"
"address_type" = "IP,AT"
"port_number" = "161"
</header>
-- <snmp-device-properties> are flags that alter the InterMapper probe's behavior.
-- You generally do not need to use these, but they can be useful for devices that don't
-- work as expected. For more information, see the <snmp-device-properties> section of the
-- Developer Guide's at: http://dartware.com/support/docs/index.html
<snmp-device-properties>
-- none required
</snmp-device-properties>
-- Parameters are user-settable values that the probe uses for its comparisons.
-- Specify the default values here. The customer can change them and they will be retained for each device.
<parameters>
-- No parameters specified.
</parameters>
-- InterMapper retrieves the <snmp-device-variables> using the OID or variable names from the MIB.
-- Specify the variable name, the MIB name or OID, the format (usually DEFAULT) and a short description.
<snmp-device-variables>
oid_1_3_6_1_4_1_4128_1, 1.3.6.1.4.1.4128.1, DEFAULT, "1.3.6.1.4.1.4128.1"
oid_1_3_6_1_4_1_4128_2, 1.3.6.1.4.1.4128.2, DEFAULT, "1.3.6.1.4.1.4128.2"
oid_1_3_6_1_4_1_4128_3, 1.3.6.1.4.1.4128.3, DEFAULT, "1.3.6.1.4.1.4128.3"
oid_1_3_6_1_4_1_4128_4, 1.3.6.1.4.1.4128.4, DEFAULT, "1.3.6.1.4.1.4128.4"
oid_1_3_6_1_4_1_4128_5, 1.3.6.1.4.1.4128.5, DEFAULT, "1.3.6.1.4.1.4128.5"
oid_1_3_6_1_4_1_4128_6, 1.3.6.1.4.1.4128.6, DEFAULT, "1.3.6.1.4.1.4128.6"
oid_1_3_6_1_4_1_4128_7, 1.3.6.1.4.1.4128.7, DEFAULT, "1.3.6.1.4.1.4128.7"
oid_1_3_6_1_4_1_4128_8, 1.3.6.1.4.1.4128.8, DEFAULT, "1.3.6.1.4.1.4128.8"
oid_1_3_6_1_4_1_4128_9, 1.3.6.1.4.1.4128.9, DEFAULT, "1.3.6.1.4.1.4128.9"
oid_1_3_6_1_4_1_4128_10, 1.3.6.1.4.1.4128.10, DEFAULT, "1.3.6.1.4.1.4128.10"
oid_1_3_6_1_4_1_4128_11, 1.3.6.1.4.1.4128.11, DEFAULT, "1.3.6.1.4.1.4128.11"
oid_1_3_6_1_4_1_4128_12, 1.3.6.1.4.1.4128.12, DEFAULT, "1.3.6.1.4.1.4128.12"
oid_1_3_6_1_4_1_4128_13, 1.3.6.1.4.1.4128.13, DEFAULT, "1.3.6.1.4.1.4128.13"
oid_1_3_6_1_4_1_4128_14, 1.3.6.1.4.1.4128.14, DEFAULT, "1.3.6.1.4.1.4128.14"
oid_1_3_6_1_4_1_4128_15, 1.3.6.1.4.1.4128.15, DEFAULT, "1.3.6.1.4.1.4128.15"
</snmp-device-variables>
-- The 'autorecord' section specifies the variables that
-- will be saved to the InterMapper Database.
-- No 'autorecord' variables specified.
-- Specify rules for setting the device into Alarm or Warning state.
-- The rules are tested top-to-bottom, and stop when one matches.
<snmp-device-thresholds>
-- No thresholds specified.
</snmp-device-thresholds>
-- The <snmp-device-display> section specifies the text that will be appended
-- to the device's Staus Window.
<snmp-device-display>
\B5\FlexScada FlexQ4\P0\
\4\ 1.3.6.1.4.1.4128.1:\0\ $oid_1_3_6_1_4_1_4128_1 \3G\1.3.6.1.4.1.4128.1\M0\
\4\ 1.3.6.1.4.1.4128.2:\0\ $oid_1_3_6_1_4_1_4128_2 \3G\1.3.6.1.4.1.4128.2\M0\
\4\ 1.3.6.1.4.1.4128.3:\0\ $oid_1_3_6_1_4_1_4128_3 \3G\1.3.6.1.4.1.4128.3\M0\
\4\ 1.3.6.1.4.1.4128.4:\0\ $oid_1_3_6_1_4_1_4128_4 \3G\1.3.6.1.4.1.4128.4\M0\
\4\ 1.3.6.1.4.1.4128.5:\0\ $oid_1_3_6_1_4_1_4128_5 \3G\1.3.6.1.4.1.4128.5\M0\
\4\ 1.3.6.1.4.1.4128.6:\0\ $oid_1_3_6_1_4_1_4128_6 \3G\1.3.6.1.4.1.4128.6\M0\
\4\ 1.3.6.1.4.1.4128.7:\0\ $oid_1_3_6_1_4_1_4128_7 \3G\1.3.6.1.4.1.4128.7\M0\
\4\ 1.3.6.1.4.1.4128.8:\0\ $oid_1_3_6_1_4_1_4128_8 \3G\1.3.6.1.4.1.4128.8\M0\
\4\ 1.3.6.1.4.1.4128.9:\0\ $oid_1_3_6_1_4_1_4128_9 \3G\1.3.6.1.4.1.4128.9\M0\
\4\1.3.6.1.4.1.4128.10:\0\ $oid_1_3_6_1_4_1_4128_10 \3G\1.3.6.1.4.1.4128.10\M0\
\4\1.3.6.1.4.1.4128.11:\0\ $oid_1_3_6_1_4_1_4128_11 \3G\1.3.6.1.4.1.4128.11\M0\
\4\1.3.6.1.4.1.4128.12:\0\ $oid_1_3_6_1_4_1_4128_12 \3G\1.3.6.1.4.1.4128.12\M0\
\4\1.3.6.1.4.1.4128.13:\0\ $oid_1_3_6_1_4_1_4128_13 \3G\1.3.6.1.4.1.4128.13\M0\
\4\1.3.6.1.4.1.4128.14:\0\ $oid_1_3_6_1_4_1_4128_14 \3G\1.3.6.1.4.1.4128.14\M0\
\4\1.3.6.1.4.1.4128.15:\0\ $oid_1_3_6_1_4_1_4128_15 \3G\1.3.6.1.4.1.4128.15\M0\
</snmp-device-display>
